Round luminaire for installation on wall, ceiling or ground – recessed.
Configuration: turned aluminium body (EN AW-6060 alloy) with 15 micron anodizing for high resistance to corrosion. AISI 316L cap, open frame and cover. Diffuser: polycarbonate or methacrylate transparent or sandblasted (see the catalogue pages for reference).
Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
Protection rating: IP67
In compliance with EN 60598-1 standards
Class of insulation: III
Installation: the luminaire is equipped with a piece of cable for an easy-to-make connection. In-ground version: the cable is integrated with an H20 STOP device. Sigma is equipped with a dc/dc highly efficient resin-coated converter that removes electromagnetic interference and is protected against polarity reversal and sudden voltage peak. Outdoor use requires suitable flexible cables. Installation in solid surfaces requires a dedicated box for installation to be purchased separately, installation in panels is only possible with the version with springs. It is important to provide for the in-ground version a >200mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.
We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.
Schematic light drawing
- Power (W): 2.2
- System power (W): 3.4
- CCT (K): 3000K
- CRI: 80
- Net lumen (lm): 114
- Mountings: Ceiling, Ground, Wall surface
- Environment: Outdoor
- Lighting type: Direct
- LED type: Power LED
- Light distribution: Symmetric
- Optical type: Medium
- Frequency (Hz): 50-60
- Voltage (V): 24
- Dimmable: No
- Driver type: Not dimmable
- Emergency: Without
- Insulation class: III
- Color: Inox
Notes: Dimmable version on request
Power Supply 8W 100÷240Vac/24Vdc 350mA Ip20
- Item Code: 150
Power Supply 100÷240Vac/ 8W at 24Vdc/ 6W at 350mA Ip65
- Item Code: 106
Power Supply 10W 110÷240Vac/24Vdc Ip20
- Item Code: 87
Power Supply 10W 110÷240Vac/24Vdc Ip67
- Item Code: 175
Power Supply 20W 220÷240V/24Vdc Ip67
- Item Code: 147
Power Supply 50W 120÷240V/24Vdc Ip67
- Item Code: 155
Power Supply 70W 220÷240V/24Vdc Ip67
- Item Code: 110