Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
FLOS-RHO-SQUARE-METHACRYLATE-500X500
RHO-GROUND-RECESSED-OUTDOOR-FLOS-GALLERY-258X258-3

Rho square Wall

4000K

Item Code: 517082

Round luminaire for installation on wall, ceiling or ground – recessed.
Configuration: turned aluminium body (EN AW-6060 alloy) with 15 micron anodizing for high resistance to corrosion. AISI 316L cap, open frame and cover. Diffuser: polycarbonate or methacrylate transparent or sandblasted (see the catalogue pages for reference).
Double layer coating for high resistance to corrosion: the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.
Protection rating: IP67
In compliance with EN 60598-1 standards
Class of insulation: III
Installation: the luminaire is equipped with a piece of cable for an easy-to-make connection. In-ground version: the cable is integrated with an H20 STOP device. Rho is equipped with a dc/dc highly efficient resin-coated converter that removes electromagnetic interference and is protected against polarity reversal and sudden voltage peak. Outdoor use requires suitable flexible cables. Installation in solid surfaces requires a dedicated box for installation to be purchased separately, installation in panels is only possible with the version with springs. It is important to provide for the in-ground version a >200mm gravel layer or a drain system (for concrete surfaces) to ensure good drainage and to avoid water stagnation.
Parallel wiring
We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.

Technical drawing
Schematic light drawing
Diffused light
Main specifications
  • Power (W): 1.6
  • System power (W): 2.3
  • CCT (K): 4000K
  • CRI: 80
  • Net lumen (lm): 13
  • Mountings: Wall surface
  • Environment: Outdoor
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Diffused light
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 45627
  • Dimmable: No
  • Driver type: Not dimmable
  • Emergency: Without
  • Insulation class: III
Physical

This data is not currently available for this product

Notes

Dimmable version on request