Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
F5960015-FLOS-REAL_MATTER-NOCOLOUR-REAL-MATTER-POLISHED-COPPER-1950X1950
HyperFocal: 0
Real-Matter-Wall-Piero-Lissoni-Flos-Outdoor-C-Thumb-02
HyperFocal: 0
HyperFocal: 0

Colors (4)

Real Matter Polished Copper

LED - 3000K - BEAM 80

Item Code: F5971015

Outdoor recessed wall-mounted luminaire with LED light source.
Body made of AISI 316L stainless steel treated with the PVD process (Physical Vapour Deposition). With this innovative treatment, after the surface is polished or brushed according to the choice of finish, the surfaces of the Real Matter are coated with a thin film of metals such as zirconium and titanium. Combining with the steel at the molecular level, these increase the resistance to both mechanical and atmospheric agents, allowing elegant, durable finishes to be created.
UV-stabilized polycarbonate diffuser.
Remote 24-V power supply sold separately.
The fixture is supplied with a 200-mm cable and IP connection kit.
Box-free installation on masonry or concrete. The fixture is glued directly onto the surface (glue chosen by the installer depending on the surface material).

Technical drawing
Schematic light drawing
Asymmetric
Certificates
  • Y
  • IP9
  • IK08
  • CM10
Main specifications
  • Lamp category: LED
  • Power (W): 3
  • CCT (K): 3000K
  • CRI: 80
  • Net lumen (lm): 82
  • Mountings: Wall surface
  • Environment: Outdoor
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Asymmetric
  • Optical type: Asymmetric
  • Beam angle (°): 80
  • Beam angle C90-270 (°): 30
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 24
  • Dimmable: Yes
  • Driver: remote excluded
  • Driver type: Not dimmable, Electronic dimmable 1-10V, Electronic dimmable DALI
  • Emergency: Without
  • Insulation class: III
Physical
  • Color: Polished Copper
  • Orientation: Fixed
  • Weight (kg): 0.60
Notes

We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the coating. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Choose the order code

Choose your language