Thumbnail
F004D22A012 Forest Green

Landlord Spot Ø40 PWM Dimmable Forest Green

Spot adjustable head for installation on ground poles or on wall base. Poles and base to be ordered as separated accessories. Heads are equipped with a dismountable ferrule, to insert flood lens or up to two honeycombs, (to be ordered as separate accessories). 24V remote power supply to be ordered separately. Each head comes with a 2000 mm lenght outgoing cable and a wiring kit.

LED - Power LED - 2.3W - 122lm - 2700K - CRI> 80 - Beam° 34

Are you a professional and your project needs consulting and support?
An exclusive one-on-one service for our professional clients providing specialist support and advice.
Technical Drawing
Dr-Landlord_Spot_D40
Main specifications
Mounting
Wall, Ground
Environments
Outdoor wet location
LED type
Power LED
Lamp category
LED
Ilcos
No
Power (W)
2.3
System flux (lm)
122
Schematic light drawing
F004D22A0XX
Photometric
Lighting type
Direct
Light distribution
Symmetric
CCT (K)
2700
CRI>
80
Beam angle C0-180 (º)
34
Beam angle C90-270 (º)
34
Electrical
Insulation class
III
Frequency (Hz)
50-60
Main voltage (Vac)
24
Driver
Remote excluded
Dimmable
Yes
Dimming type
Non Dimmable, Dimmable 1-10 PWM, Dimmable DALI 1 PWM
Emergency type
No
Physical
Colour
Forest Green
Trim
No
Orientation
Adjustable
Rotation (º)
359
Transversal tilting (°)
120
Net weight (kg)
0.3
IP internal
66
IECEE-CB
EAC
Risk 1
IK09 - 10.00 Joule
66
Notes

During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.
For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges
These effects are frequently caused by:
• over voltage coming from the mains’ network where fixture is connected.
• electrostatic discharge (ESD) coming from the environment.
The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Ecodesign and Energy Labelling

This product contains a light source of energy efficiency class E

REPLACEABLE2 Replaceable (LED only) light source by a professional

Accessories & Power Supply

Required (19)
Optional (6)
All
Power supply
Accessory