IP65 projector for external use, designed to offer diffuse lighting.
It is characterized by an aluminium disk shape head, orientable up to 20º beam and lockable in position, to be powered at 24V, and available in 2700K, 3000K and 4000K colour temperature.
It is the perfect tool to light bushes, flowerbed and transit areas with an homogenous diffuse light beam.
Landlord Soft can be installed on solid ground spikes, with the possibility of an optional picket.
20º adjustable head for installation on ground poles.
Poles to be ordered as separated accessories.
24V remote power supply to be ordered separately.
Each head comes with a 2000 mm lenght outgoing cable and a wiring kit.
Schematic light drawing
- Lamp category: LED
- Power (W): 5
- CCT (K): 4000K
- CRI: 80
- Net lumen (lm): 269
- Mountings: Ground
- Environment: Outdoor wet location
- Lighting type: Direct
- LED type: Top LED
- Light distribution: Symmetric
- Optical type: Diffused light
- Beam angle (°): 51
- Beam angle C90-270 (°): 51
- Frequency (Hz): 50-60
- Voltage (V): 24
- Dimmable: Yes
- Driver: Array
- Driver type: Dimmable 1-10 PWM, Dimmable DALI PWM
- Emergency: Without
- Insulation class: III
- Color: Black
- Orientation: Adjustable
- Weight (kg): 0.40
- Rotation (°): 359
Notes: During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
Wall base Black
- Item Code: F004Z040030
Pole with base H 300 mm Black
- Item Code: F004Z010030
2 way terminal block 4 poles IP68 H20 stop. (ø5,5÷12mm cable)
- Item Code: F990C00A000
3/4 way terminal block 4 poles IP68 H2O stop. (ø5,5÷12mm cable)
- Item Code: F990C010000
Pole with base H 900 mm Black
- Item Code: F004Z030030
- Item Code: F004Z060000
Pole with base H 600 mm Black
- Item Code: F004Z020030
Power supply 120/270Vac / 24Vdc.35W Dimmable DALI PWM control. IP67
- Item Code: F990B03A000
DALI PWM control interface 24Vdc 120W. IP67. Power supply not included
- Item Code: F990B01A000
Power supply 24V 10W /110-240V IP20 Class II selv. Non Dimmable
- Item Code: RF25747
Power supply 120/270Vac / 24Vdc.70W Dimmable DALI PWM control. IP67
- Item Code: F990B05A000
Power supply 24V 10W / 110-240V IP67 Class II selv._Non Dimmable
- Item Code: RF25757
Power supply 24Vdc 50W / 120-240V IP67 Class II selv. Non Dimmable
- Item Code: RF25755
Power supply 24Vdc 70W / 220-240V IP67 Class II selv. Non Dimmable
- Item Code: RF25749
Power supply 24V 8W / 110-240V IP65 Class II selv. Non Dimmable
- Item Code: RF25748
Power supply 120/270Vac / 24Vdc.35W Dimmable 1-10V PWM control. IP67
- Item Code: F990B02A000
Power supply 24V 8W / 110-240V IP20 Class II selv._Non Dimmable
- Item Code: RF25754
Power supply 24Vdc 20W / 110-240Vdc (15W@110V) IP67 Class II selv. Dimmable DALI
- Item Code: RF26387
1-10V PWM control interface 24Vdc 120W. IP67. Power supply not included.
- Item Code: F990B00A000
Power supply 120/270Vac / 24Vdc.70W Dimmable 1-10V PWM control. IP67
- Item Code: F990B04A000