Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
landord_ground_d49_uplight_stainless-steel-1950X1950-29
Landlord-Ground-in-ground-Piero-Lissoni-Flos-Outdoor-C-thumb-01
Landlord-Ground-in-ground-Piero Lissoni-Flos-Outdoor-C-thumb-02
Landlord-Ground-in-ground-Piero Lissoni-Flos-Outdoor-C-thumb-03

Landlord Ground Ø49 with Honeycomb Stainless Steel

LED - 3000K - BEAM 40

Item Code: F004A37A00502

IP67 luminaries for ground recessed installation, powered 24V. Body in anodized, then resined aluminium, external ring in shot-peened stainless steel, encasing the entire control electronics. Head available in two sizes, ø49 mm, and ø64 mm, with frontal or grazing emission (one, two or four beams).
Frontal emission version are available with spot or medium optic, or with integrated non removable honeycomb, for maximum visual confort.
To be installed in its installation box.
24V remote power supply to be ordered separately.
Necessary box for installation, to be ordered separately.

Also available in: Landlord
Technical drawing
Schematic light drawing
Medium down
Certificates
  • Y
  • IP11
  • IK10
  • CM10
Main specifications
  • Lamp category: LED
  • Power (W): 2.30
  • CCT (K): 3000K
  • CRI: 80
  • Net lumen (lm): 100
  • Mountings: Ground recessed, Wall recessed
  • Environment: Outdoor
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Medium down
  • Beam angle (°): 40
  • Beam angle C90-270 (°): 40
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 24
  • Dimmable: No
  • Driver: remote excluded
  • Driver type: Not dimmable
  • Emergency: Without
  • Insulation class: III
Physical
  • Color: Stainless Steel
  • Orientation: Fixed
  • Weight (kg): 0.30
Notes

Carefully install and maintain the fixtures to avoid damaging the coating. For LED fixtures, most problems are tied to electrical issues related to the insulation, which may cause destructive electrical discharges. These are frequently caused by: • power surges from the power network where fixture is connected. • electrostatic discharge (ESD) from the environment. We recommend installing a power-surge protection device on the fixture to reduce the intensity of these effects and prevent irreversible damages. The specific device should be chosen based on the electrical characteristics.

Choose the order code

Choose your language