Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
FLOS-IN-VITRO-WALL-FOREST-GREEN-1950X1950
In-Vitro-Ceiling-Flos-gallery-02-258×258
In-Vitro-Wall-Flos-gallery-04-258×258

Colors (7)

In Vitro Wall Dimmable 1-10V

LED - 2700K - BEAM 111

Item Code: F018B22B012

Lighting unit with diffuse light for exterior wall installation. Integrated opalescent diffuser and external protection in transparent borosilicate glass.
The structure is made of die-cast and extruded aluminium treated with a chemical conversion process for effective resistance to atmospheric agents. The body is powder coated and comes in various finishes.
Integrated LED light source with Edge Lighting optical technology to guarantee perfect uniform lighting.
Light source included. Integrated 220–240 V ON/OFF or dimmable electrical power.
110-V version upon request.

Technical drawing
Schematic light drawing
Diffused light
Certificates
  • Y
  • IP10
  • IK10
  • CM10
Main specifications
  • Lamp category: LED
  • Power (W): 11
  • CCT (K): 2700K
  • CRI: 80
  • Net lumen (lm): 667
  • Mountings: Wall
  • Environment: Outdoor
Optical
  • Lighting type: Direct
  • LED type: Edge Lighting
  • Light distribution: Symmetric
  • Optical type: Diffused light
  • Beam angle (°): 111
  • Beam angle C90-270 (°): 111
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 220-240
  • Dimmable: Yes
  • Driver: Integrated
  • Driver type: Electronic dimmable 1-10V
  • Emergency: Without
  • Insulation class: I
Physical
  • Color: Forest Green
  • Orientation: Fixed
  • Weight (kg): 2.2
Notes

We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Choose the order code

Choose your language