Round luminaire for installation in-ground – recessed.
Configuration: AISI 316 deep-drawn stainless steel structure with milled AISI 316L stainless steel finish frame. Glass diffuser: transparent or sandblasted. The stainless steel structure allows installation in extreme conditions (sea or road salt).
Protection rating: IP67
In compliance with EN 60598-1 standards
Class of insulation: mains: I; low voltage: III
Installation: the luminaire is equipped with a piece of cable with a 2-way connector for 3-conductor cables (H2O STOP) for an easy-to-make connection. LED 24V is equipped with a dc/dc highly efficient converter that removes electromagnetic interference and allows parallel wiring and is protected against polarity reversal and sudden voltage peak. Outdoor use requires suitable flexible cables. Installation requires a dedicated box for installation (to be ordered separately). It is important to provide a >400mm gravel layer or a drain system (for concrete surface) to ensure good drainage and to avoid water stagnation.
We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.
During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating.
Damages on the coating exposed to outdoor conditions or water, could cause corrosion.
Chemical substances affect the anticorrosion covering protection.
Schematic light drawing
- Power (W): 15
- System power (W): 16
- CCT (K): 3000K
- CRI: 90
- Net lumen (lm): 741
- Mountings: Floor recessed
- Environment: Outdoor wet location
- Lighting type: Direct
- LED type: Power LED
- Light distribution: Symmetric
- Optical type: Medium
- Frequency (Hz): 50-60
- Voltage (V): 220-240
- Dimmable: No
- Driver type: Non Dimmable
- Emergency: Without
- Insulation class: I
- Color: Inox