Top

No spam, just the best from the world of Flos and design, we promise.

Filter by designers
All,
Filter by families
All,
Bellhop-Pole_anthracite_CON-BASE-1950×1950-35
Bellhop-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-thumb-01
Bellhop-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-thumb-02
Bellhop-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-thumb-03
Bellhop-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-thumb-04
Bellhop-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-thumb-05
Bellhop-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-thumb-06
Bellhop-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-08
Bellhop-Pole-Bollard-Edward-Barber-Jay-Osgerby-Flos-Outdoor-C-07

Colors (3)

Bellhop Pole with base H 3020 mm Dali

Item Code: F003H31D033

Pole version of the Bellhop Outdoor Collection for diffuse light.
Aluminum head mounted on a 3m or 4m long extruded pole, available for installation on rigid surface or in ground.
220-240V power supply included.
Ready for installation on solid surface.
Base plate available as accessory.
Each luminaire is equipped with 200 mm cable for connection inside the luminaire body.
Reccomended connection wit a 2 way terminal block 4 poles IP68 H2O Stop, to be ordered separately.
110V and dimmable versions available on request.

Technical drawing
Schematic light drawing
Diffused light
Certificates
  • Y
  • IP9
  • IK10
  • CM10
Main specifications
  • Lamp category: LED
  • Power: 30.00
  • CCT: 3000K
  • CRI: 80
  • Net lumen (lm): 2590
  • Mountings: Ground
  • Environment: Outdoor
Optical
  • Lighting type: Direct
  • LED type: Power LED
  • Light distribution: Symmetric
  • Optical type: Diffused light
  • Beam angle (°): 93
  • Beam angle C90-270 (°): 93
Electrical
  • Frequency (Hz): 50-60
  • Voltage (V): 220-240
  • Lamp holder: LED
  • Dimmable: Yes
  • Driver: remote included
  • Driver type: Electronic dimmable DALI
  • Emergency: Without
  • Insulation class: I
Physical
  • Color: Anthracite
  • Orientation: Fixed
  • Weight (kg): 15
Notes

During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.

Choose the order code

Choose your language