Ground-recessed luminaire for outdoor use, walkable and trafficable, available in three sizes, with adjustable optics in various configurations.
External body made of stainless steel AISI 316L treated with the PVD process (Physical Vapour Deposition).
Thanks to this innovative treatment, the surfaces of A-Round are coated with a thin film of metals, such as zirconium and titanium which, combining with the steel at the molecular level, increases the resistance to both, mechanical and atmospheric agents, permitting the execution of elegant and durable finishings.
The body of the luminaire is made of die-cast aluminum EN AB-47100 with low copper content, coated with two layers of paint with high resistance to corrosion.
High-strength tempered clear glass, screen-printed to reduce glare.
Driver for remote installation included, provided with M12 quick connector for watertight coupling.
Installation requires a housing for flush mounting, to be ordered separately.
It is necessary to provide an adequate level of gravel (> 300 mm) or a drain system to ensure drainage and avoid water stagnation. To ensure the sealing of the cable gland it is necessary to use flexible electric cables suitable for use in outdoor environments.
Integrated 110/240V power supply. Box for installation required, to be ordered separately. Dimmable version on request.
Adjustment on the horizontal axis: max 15°. Rotation around the vertical axis: max 359°.
Schematic light drawing
- Lamp category: LED
- Power (W): 8
- CCT (K): 3000K
- CRI: 80
- Net lumen (lm): 576
- Mountings: Ground recessed
- Environment: Outdoor wet location
- Lighting type: Direct
- LED type: Power LED
- Light distribution: Symmetric
- Optical type: Spot down
- Beam angle (°): 14
- Beam angle C90-270 (°): 14
- Frequency (Hz): 50-60
- Voltage (V): 110-240
- Dimmable: No
- Driver: Remote included
- Driver type: Non Dimmable
- Emergency: Without
- Insulation class: II
- Color: Satin Bronze
- Orientation: Adjustable
- Rotation (°): 359
Notes: We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
Box for installation
- Item Code: F4597000
2 way terminal block 4 poles IP68 H20 stop. (ø5,5÷12mm cable)
- Item Code: F990C00A000
3/4 way terminal block 4 poles IP68 H2O stop. (ø5,5÷12mm cable)
- Item Code: F990C010000
Flood lens 1 unit Kit
- Item Code: F4558000
S.P.D. (SURGE PROTECTION DEVICE)
- Item Code: F990E00A000
Honeycomb 1 unit Kit
- Item Code: F4555000