Designed in 2014 as part of the iconic IC Lights series by Michael Anastassiades, a collection that explores balance, movement and identity through minimal, poetic forms. inspired by the dexterity of a contact juggler and the visual tension of a sphere poised in perfect equilibrium. The name IC refers to an identity code used by British immigration officers, subtly referencing to the complexities of navigating life between cultures. A contemporary classic, IC Lights T reflects Anastassiades interest in industrial design.
Dimensions
- Weight (kg)
- 3000
- Width (mm)
- 20
- Length (mm)
- 1400
- Height (mm)
- 3000
- Cord length (mm)
- 3000
- Cord colour
- Black
- Canopy colour
- Amber
-
Canopy length/diameter (mm)
Dimensions
DimensionsThe part that attaches the lamp to the ceiling or wall, hiding the wires and fixing parts.
- 100
-
Canopy width (mm)
Dimensions
DimensionsThe part that attaches the lamp to the ceiling or wall, hiding the wires and fixing parts.
- 300
-
Canopy height (mm)
Dimensions
DimensionsThe part that attaches the lamp to the ceiling or wall, hiding the wires and fixing parts.
- 600
Canopy
Main features
- Item code
- 0000000-TEST
- EAN
- 0123456
- Construction material
- 19
- Environment
- Indoor dry location
- Mounting
- Suspension
-
Power (W)
Main features
Main featuresMeasured in watts (W), power indicates how much electricity a lamp consumes.
- 56.6
-
Forward voltage (V)
Main features
Main featuresThe voltage required for an LED to operate properly, measured in volts (V). This can vary depending on the type of LED.
- 60000
- CCT (K)
-
3000
-
IP rating
Main features
Main featuresTells you how well the lamp is protected against dust and water. A higher number means better protection.
- 20
-
Light source type
Main features
Main featuresIndicates whether the lamp uses a traditional bulb or an LED light source.
- LED
-
Lamp category
Main features
Main featuresIndicates the type of light bulb used (e.g. LED, halogen or incandescent), each with different brightness, energy use and light quality.
- LED
-
Lamp type
Main features
Main featuresIndicates the specific bulb required (e.g. A60, G9, GU10), so you can choose the right shape and fitting for your lamp.
- A Shielded
-
Lamp holder
Main features
Main featuresRefers to the socket or lamp holder (e.g. E27, E14, GU10), which determines bulb compatibility.
- 2GX13
- Bulb finish
-
Frosted
Main features
Main featuresSoftens light and reduces glare
-
LED type
Main features
Main featuresIndicates the type of LED used (e.g. COB, SMD or filament), which affects brightness, energy use and the look of your lamp.
- Top LED
- Lighting type
- Indirect
-
Number of lamps
Main features
Main featuresSpecifies how many light sources a fixture requires or includes, affecting brightness, light distribution and aesthetics.
- 4
- Energy label
- A
- Light source replaceable
-
Non-replaceable light source
-
Certifications
Power supply and control
- Plug type
- Type A
-
Cable ingress
Power supply and control
Power supply and controlThe point where the cable connects to the lamp, designed to keep the wiring safe and secure.
- Double
-
Precabled
Power supply and control
Power supply and controlIndicates that the lamp comes with the wiring already fitted for quick and easy installation.
- 5000
- Batteries inside
- No
- Battery type
- LI-PO
- Charging socket/connector
- MICROUSB
- Charging min. time
- 500
- Driver
-
Integrated
Power supply and control
Power supply and controlDriver is built into the lamp.
-
Dimmable
Power supply and control
Power supply and controlTells you if the brightness can be adjusted with a dimmer switch.
- Yes
- Dimming interface
- Not Dimmable
-
Dimming range (%)
Power supply and control
Power supply and controlTells you how much you can adjust the brightness. A wider range gives you more control, from soft light to full illumination.
- 300
-
Dimming type
Power supply and control
Power supply and controlExplains what kind of dimmer the lamp uses, from basic switches and simple phase-cut dimmers to advanced digital systems like DALI.
- Dimmable 1-10 PWM
- Power supply replaceable
-
Non-replaceable control gear
Battery
Driver
Downloads
Additional Information
We recommend using a connection system with a degree of protection greater than or equal to the degree of protection of the luminaire. During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion. Chemical substances affect the anticorrosion covering protection. For LED fixtures, there is evidence that most of the damages are connected to electrical effects related to the insulations, which cause destructive electrical discharges These effects are frequently caused by: • over voltage coming from the mains’ network where fixture is connected. • electrostatic discharge (ESD) coming from the environment. The use of a protective device against the overvoltage on the electrical installation is warmly suggest this helps to reduce the intensity of some of these phenomenon and prevent irreversible damages. The selection of the type of device to be used must be adjust on the electrical plant.
Do you want to discover more?
