- Weight (kg)
- 3.1
- Width (mm)
- 330
- Length (mm)
- 330
- Height (mm)
- 185
- Cord length (mm)
- 2700
- Canopy colour
- White
-
Canopy length/diameter (mm)
Dimensions
DimensionsThe part that attaches the lamp to the ceiling or wall, hiding the wires and fixing parts.
- 132
-
Canopy height (mm)
Dimensions
DimensionsThe part that attaches the lamp to the ceiling or wall, hiding the wires and fixing parts.
- 1.220
- Item code
- F1084026
- EAN
- 8059607073780
- Environment
- Indoor dry location
- Mounting
- Suspension
-
Power (W)
Main features
Main featuresMeasured in watts (W), power indicates how much electricity a lamp consumes.
- 30
-
Forward voltage (V)
Main features
Main featuresThe voltage required for an LED to operate properly, measured in volts (V). This can vary depending on the type of LED.
- 220-250
-
IP rating
Main features
Main featuresTells you how well the lamp is protected against dust and water. A higher number means better protection.
- 20
-
Light source type
Main features
Main featuresIndicates whether the lamp uses a traditional bulb or an LED light source.
- Bulb
-
Lamp category
Main features
Main featuresIndicates the type of light bulb used (e.g. LED, halogen or incandescent), each with different brightness, energy use and light quality.
- LED retrofit
-
Lamp type
Main features
Main featuresIndicates the specific bulb required (e.g. A60, G9, GU10), so you can choose the right shape and fitting for your lamp.
- A
-
Lamp holder
Main features
Main featuresRefers to the socket or lamp holder (e.g. E27, E14, GU10), which determines bulb compatibility.
- E27
- Lighting type
- Total
-
Number of lamps
Main features
Main featuresSpecifies how many light sources a fixture requires or includes, affecting brightness, light distribution and aesthetics.
- 1
- Light source replaceable
-
Replaceable (LED only) light source by an end-user
-
- Batteries inside
- No
-
Dimmable
Power supply and control
Power supply and controlTells you if the brightness can be adjusted with a dimmer switch.
- Yes
- Dimming interface
- Remote Dimmable (Dimmer Not Included)
Edward Barber and Jay Osgerby’s East London studio combines experimentation and innovation to push the boundaries of design, bridging industrial processes, new technologies and fine art. Driven by a strong collaborative ethos, the studio mentors the next generation of designers.
MEET THE DESIGNEREdward Barber and Jay Osgerby’s East London studio combines experimentation and innovation to push the boundaries of design, bridging industrial processes, new technologies and fine art. Driven by a strong collaborative ethos, the studio mentors the next generation of designers.
MEET THE DESIGNER